Unfinished Acacia Herringbone Countertop, 72 x 26 in
Create a custom worktop or desktop with this unfinished acacia herringbone countertop. The illustrated panel measures 72 x 26 x 1.5 inches, with a pre-sanded surface and a repeating wood pattern ready for a project-specific finish.
Description
This acacia herringbone countertop provides a patterned solid-wood surface for a custom kitchen worktop, desktop or furniture project. The illustrated panel measures 72 x 26 inches and is 1.5 inches thick. It is supplied unfinished and pre-sanded, allowing the final surface treatment to be selected for the intended setting.
Natural acacia grain in a patterned surface
The panel combines acacia wood strips in a repeating V-shaped layout. Changes in grain direction and shade create a decorative surface that can become a focal point in a room. Each panel may differ in its grain, color balance and individual strip appearance.
The original specification describes solid acacia wood with the surface and edges pre-sanded. Review a physical sample before coordinating the panel with cabinets, flooring or furniture. An applied oil, stain or coating can change the color and contrast, so test the intended finish on a suitable sample first.
Acacia herringbone countertop dimensions
The dimension image gives the following reference size. Check the full footprint against your installation drawing, including any required overhangs, adjoining surfaces and clearances.
| Specification | Reference detail |
|---|---|
| Material | Solid acacia wood |
| Surface preparation | Pre-sanded, unfinished |
| Length | 72 inches / 6 feet / approximately 182.9 cm |
| Width | 26 inches / approximately 66 cm |
| Thickness | 1.5 inches / approximately 3.8 cm |
| Pattern | Repeating V-shaped wood-strip arrangement |
| Supply scope | Countertop panel; supports, cabinets and fittings specified separately |
Confirm the ordered dimensions, dimensional tolerances and edge details before production. If your project requires a different length, a sink opening, cable access or other machining, provide a drawing for review. Cutting and drilling should be planned with the finished layout and support arrangement in mind.
Choose a finish for the intended use
This unfinished acacia countertop requires a suitable finishing plan before regular use. Select the surface treatment according to the project, desired color and expected exposure to moisture or spills. Follow the finish supplier's preparation, application and drying instructions.
Include the edges, underside and any cut or drilled areas in the finishing specification as appropriate for the chosen system. For a kitchen worktop, discuss suitability for that application with the supplier and installer. A separate cutting board and protective mats help keep the finished surface in good condition during daily use.
Use the patterned panel as a desktop
The wood pattern can also suit a study desk, office furniture range or console project. Compare the panel size with the proposed drawer units or base, allowing room for seating, equipment and access around the finished piece.
The office image shows a possible completed arrangement with white drawer units, a chair and a laptop. Those items are display context and are separate from the panel supply. Confirm the base, fixings and support positions for your chosen dimensions and intended load before installation.
Handling and care
Inspect the panel when it arrives and follow the supplied storage and installation guidance. Keep it dry and supported during project preparation. Protect the surface from dirt and accidental marks before finishing, particularly if it will receive a clear or light-colored treatment.
After finishing, wipe spills promptly and use cleaning products compatible with the applied surface treatment. Avoid prolonged contact with standing water. Maintenance depends on the finish: an oiled surface may need a different care routine from a coated surface. Follow the product-specific directions supplied with your order.
Wholesale countertop questions
Is the panel already sealed?
The listed product is unfinished and pre-sanded. Confirm the finishing specification in the quotation if you need a treated panel or a particular color for your project.
Can the dimensions or packaging be customized?
Share your drawing, finish requirements, quantity and destination for an OEM/ODM discussion. Changes to dimensions, machining, edge details and packaging depend on feasibility and sample approval. Pricing, minimum order quantity and lead time are confirmed in the quotation.
Request an acacia countertop quotation
Fujian Xianxu Bamboo & Wood Co., Ltd. was founded in 2018 in Nanping, Fujian, China. Our manufacturing network spans China and Vietnam, serving customers in more than 40 countries and regions. Learn about our company, explore our Vietnam manufacturing operations, or browse related bamboo and wooden kitchenware.
For samples and wholesale enquiries, contact our team at sales01@fzexcellent.com.cn or +86 147 5995 5441.
Reviews
There are no reviews yet.